Beats by Dre is a brand of headphones that are very popular in the audio-listening world. They are known for their quality sound, stylish looks, and high price point.
Unfortunately, because they are priced higher and look nicer, people are less cautious with how they treat them. Dropping them or getting them wet is not a big deal because you can just buy a new pair, right?
Wrong. While there are sites that sell replacement parts for the Beats headphones, you can also fix some of the issues yourself. This will help save you some money and put your tech-repair skills to the test.
Some of the parts that can be repaired or replaced are the ear cushions, wires, jacks, and foam interior pieces. Once you learn how to do it, it will be easy!
This article will go into detail on how to repair your damaged Beats headphones.
Buy the correct parts to repair your Beats
When repairing Beats, making sure you have all the parts you need is a crucial step. You can either buy a replacement kit or individually buy the parts.
If you buy a full kit, make sure it includes the housing, wires, speakers, and mic if needed. If you already have these parts, then just buy a new housing and new speakers!
The hardest part is finding replacements for the cushions that cover the speakers. These are hard to find online and must be ordered from outside of the country. You can check out our article on how to find these replacements here!
Once you have all the parts needed to repair your Beats, it is time to move onto the next step! Make sure you have all the correct pieces for your specific pair of Beats to avoid having to order more parts.
Take them apart
The first step in how to repair Beats headphones is to take them apart. You will need to remove the padded ear covers, the backing, the wires, and the speakers.
The hardest part is probably taking off the padding on the ear covers. You will need to use a sharp object such as a knife or razor to cut through the material.
Once you have done this, you can remove the backing and then pull out the wires and speakers. At this point, you can clean all of the parts with a mild soap and water solution or specialized audio equipment cleaning solution.
If there are tears in the material, you can either sew them up or find similar looking material to replace it with.
Find the broken part
The first step in repairing your Beats headphones is to find the broken part. If the earpiece has fallen off, you will need to find the piece that connects the earpiece to the wire. If the internal speaker has fallen out, you will need to find a new one.
These can be hard to locate, as most places do not sell just the speaker for the headphones. You will have to purchase a complete new pair which is expensive. You can search online for places that sell just the speakers though!
Online sellers like Amazon have a wide range of parts available if you search correctly.
Replace the broken part with the new one
Once you have all the parts needed to fix your pair of Beats headphones, you can start the repair process. Make sure you have all the parts listed above as well!
The first thing to do is replace the earcup covers. To do this, remove the screws that hold the outer rim of the earcup in place. Then, pull out the inner part and replace it with a new one.
Next, remove the wiring from inside the earcups by carefully pulling on them. Once done, reattach them into their proper position and re-secure them with tape or glue.
Finally, test out your newly repaired Beats by plugging them in and listening to some music! Check for any loose or slipping parts and re-secure if needed.
Put your Beats back together
Once you have all the pieces back in place, it is time to put your headphones back together. All you need to do is line up the screws with the holes they go into and put some pressure on them.
Then do the same with the other side and push the two sides together. Once you get a feel for it, it only takes a few seconds!
Once you get good at it, you will be able to do it quickly and re-connect your Beats in case of an emergency.
It can be tricky so take your time and get a feel for how hard to press down on the screws and where they go. Even if you are not too confident in your skills, just putting some pressure on them will help prevent them from coming apart again.
Finally, check to make sure that all of the wires are tucked in properly.
Test them out to make sure they work properly
Once you have all the pieces put back in place, it is time to test them out. Plug the headphones into anything that plays music- a phone, computer, tablet, etc.
Turn up the volume to check for noise coming through both speakers and the tangle resistance. Try twisting and turning them while they are playing a song to check for sound continuity.
If they work, then you did it! Congratulations!
It can be frustrating to spend so much time trying to fix something only to have it not work at the end, but try not to get too down about it.
Tell your friends!
Even if you do not know how to repair Beats headphones, you can still help others do so. By letting your friends know that you can repair headphones, they can bring theirs to you if they break or if they need a new pair.
Headphones are a common gift at Christmas, so if you have a friend or family member that seems to always have new headphones, ask them where they get them and where they get replacements.
You can also let them know where to get replacement parts should their headphones break due to overuse or age. This could save them some money and time!
Let them know about the different types of parts and how to tell if they are broken or not functioning. Even telling them where to find quality replacements will help-determine this by telling them what materials are durable and what are not.
Share on social media
After you have fixed your headphones, let everyone know that they are functioning again by posting on social media. You can do this via Facebook, Twitter, or Instagram.
This is an easy way to encourage other people to repair their headphones and spread the word about how to repair headphones. It also gives you an opportunity to promote your new nickname as The Headphone Repairman!
And don’t forget to tag the company that made your headphones.
Related Posts:
Hi, I’m Dominique. I love movies and want everyone to have the best home cinema experience possible. That’s why I started 1home Theatre Projector. We help people build their home cinema system using the latest technology and news on laser tv and all-around home entertainment.
We’re a small team of movie buffs (and experts) who are passionate about giving our readers the best advice and information possible. So whether you’re just starting out or you’re looking to upgrade your home cinema system, we’ve got you covered!
