In the event your projector lamp has blown, here are some things you should do. The first step is to turn up the brightness of the display. This will prolong the life of the lamp. If the image is dim or mud-colored, it’s likely the lamp has failed. If the warning message still shows up, simply disable it.
Authentic Projector Lamp Is Not the Same as A Knock Off
There is a difference between an authentic projector lamp and a knock off. A genuine lamp is made by the Original Equipment Manufacturer (OEM) for a specific brand of projector. This means that it is calibrated to the exact wattage of the projector. A knock off, on the other hand, does not have the same quality and may even be a fake.
If you are buying a new projector, you should buy the original lamp and avoid the knockoff version. It may damage your projector and void its warranty. You may also get a cheaper lamp if you are buying it from a reseller.
There are many fakes on the market, many of which are produced by well-known companies. Many of these fakes are marketed as „OEM“ lamps by deceiving resellers. These fakes are not only illegal, but also violate the intellectual property of the OEM and breach their manufacturing standards.
Authentic Projector Lamp Lasts 3,000 Hours
A projector’s lamp lifespan is measured in hours and is usually displayed in the main hub or in system settings. It can also be determined by physically inspecting the lamp, which will require taking the projector apart. However, this is not recommended if the projector is still under warranty. In addition, the lamp life of a projector can vary by model, so check the manual or the user guide to find out the exact hour life.
Some projectors are made to last longer than 3,000 hours and even longer. In fact, many of today’s models have built-in features that help extend the lamp’s life. One such feature is an automatic shut-off feature. This function saves electricity and doesn’t damage the lamp. Some models even have a mode that goes into idle mode when not in use, which prolongs the lamp’s life.
Another simple tip for extending the life of a projector lamp is to clean it regularly. Dust and other particles can cause the lamp to lose its brightness. Regularly cleaning the filter of your projector lamp can prevent this problem. You can also buy an air purifier, which can help reduce the amount of dust in the air.
Disable Warning Message if Projector Bulb Is Still Functioning
If you notice that your projector is giving you a warning message about its bulb, you may want to disable it. You can do this by going into the onscreen menu or manual of your projector. The projector is likely set up with a built-in timer, and it will let you know if your lamp is getting too old. If you disable the message, you can increase the life of your bulb.
The first step to disable the warning message is to check the bulb voltage. If you see a reading of 100, the lamp is functioning correctly. If the number is below zero, you may need to change the lamp. If the warning message remains on the screen after this, you may need to clean the lens. To do this, press and hold the „RESET“ button for 10 seconds.
After you have checked the bulb voltage, you must ensure that it is at its optimum operating temperature. The projector bulb is highly complex and functions differently than other household electronics. The lamp has a ballast system that ignites the lamp with a higher voltage during the ignition phase, and then shifts the electrical current to the running voltage.
